What preparations should be made before starting the horizontal tensile testing machine

We must understand the preparation work before starting the horizontal tensile testing machine. Many people may not be very familiar with it. Next, we will introduce the preparation before starting the horizontal tensile testing machine:

1. Check for any abnormalities in all parts and ensure that the fastening screws (caps) are not loose. The brake should be functioning properly and reliably.

2. The horizontal tensile testing machine cannot roll workpieces that exceed the specified mechanical performance range of the bending machine.

3. The operation can only be started after the workpiece is placed steadily and in the correct position, and the signal should be clear and a designated person should be assigned to command.

4. Strictly adjust the distance of the rolling machine drum according to the thickness of the board, and do not operate beyond the load.

5. When the horizontal tensile testing machine is not round enough, it is recommended to reserve a certain amount of allowance when rolling the workpiece to the end of the steel plate to prevent the workpiece from falling and injuring people.

6. Check if the coupling guard or belt guard is securely fixed.

The above is a detailed introduction to the preparation work that needs to be done before starting the horizontal tensile testing machine. Understanding these can make your horizontal tensile testing machine last longer, avoid damage during operation, and save resources.